Hey! This product can be bundled with other popular items to provide you an automatic discount at checkout. Check out our discounted bundles for more info!

Scroll Down For More Information
 

Isotemp Spa 25L (6.5 gallon)

$689.00

6.5 gallon marine-grade water heater.

This water heater is a fantastic way to get hot water by simply running or driving your van. It can heat the water through the van’s coolant lines or using the 750 watt (115 VAC) electric element off your inverter when you’re not driving. Check out our blog post about Isotemp water heaters.

Save time, headaches and general misery tracking down all the parts you'll need with our Isotemp Installation Kits that include everything you need to connect the water heater to your van's coolant system and a very helpful, step-by-step installation guide! These units must be installed inside the vehicle/vessel and should not be installed externally. Check out our blog post on how to install these heaters.

FREE ground shipping to the lower 48 states.

3 in stock (can be backordered)

SKU: 6P2523SPA0003 Category: Tags: , ,
buy with confidence, secure checkout, world-class support, free shipping
 

Description

Features:

  • Isotemp Spa’s exterior casing / jacket is made of high quality polypropylene
  • Inner tank made of AISI 316 stainless steel
  • All Isotemp water heaters use two thermostats: a temperature thermostat and a safety thermostat designed to trip in the event the tank is run dry
  • All Isotemp water heaters come standard with a mixing valve that regulates the temperature of the water coming out of the tank so that water heated to 160+ degrees can be thermostatically adjusted to your prefered temperature and extends the capacity of onboard hot water by using only a fraction of the water in the tank to produce the desired water temperature.
  • 750 Watt immersion heating element specially designed to heat water at bottom of tank
  • Robust design and manufactured to highest-quality marine standards for long service life
  • All Isotemp products are CE certified and manufactured in ISO certified facilities
  • All Isotemp tanks are covered by a 5-year limited warranty against leakage due to manufacturing defect or corrosion and a 2-year warranty on all other parts
  • Extra-thick insulation for low temperature loss, high performance
  • Extra-long corrugated coils for high heat exchange efficiency
  • The Isotemp water heaters can be connected to the coolant lines even if the water tank is empty (before you've connected the water lines), however the electrical element should not be turned on until water lines have been connected and the tank has water inside.

    BSP Fitting Manual Error & Water Supply/Outlet Plumbing Tip
    You may read in the manual that the cold water supply (inlet) and hot water outlet are BSP but the units we sell here in the USA should have BSP to NPT adapter fittings added. We highly recommend using a 1/2" female to PEX "swivel fitting" (also available in 90 degree elbow versions) to connect your supply/outlet plumbing to these water heater instead of standard threaded fittings because they have a substantial rubber gasket inside that assist in sealing and also provide the "swivel" functionality if needed.

Check out our blog post about Isotemp water heaters here.

Dimensions (PDF)
Manual (PDF)

Additional information

Weight 496 oz
Dimensions 30 × 13 × 13 in
Options

Water Heater Only, Water Heater – With Promaster Installation Kit